Warning: fread(): Length parameter must be greater than 0 in /home/drp/public_html/system/library/cache/file.php on line 32Warning: fread(): Length parameter must be greater than 0 in /home/drp/public_html/system/library/cache/file.php on line 32 Parts for all Daewoo Rifle Types

Parts for all Daewoo rifle types

Parts for all Daewoo rifle types

This is a section for parts which fit BOTH direct impingement and gas piston rifles.

Pre-89 type pistol grips, pre-89 buffers and springs, some internals, front pivot pins, any parts which fit all Daewoo rifles can be found in this section.

K1, K1A1, AR110c, Max I=Pre-89 import direct impingement rifles

K2, AR200, Max II=Pre-89 import gas piston rifles

DR200, DR300=post-90 gas piston rifles

A NOTE ABOUT THE NUMBERS, the parts listed are notated with the numbers of the parts as they appear in the factory  manuals' exploded drawings. The DR200 and AR110c manuals have drawings with number each part. SO, if you have one of these manuals, which are available at http://www.stevespages.com/page7b.htm you can ensure that you're ordering the correct part by checking the drawing.




Product Compare (0)


90 degree safety lever. All Rifle types.

90 degree safety lever. All Rifle types.

Our famous (among Daewoo people) 90 degree selector. For years we've bemoaned the 180 degree sa..

$65.00

Bolt, Pistol Grip Attaching K1 PN 2, No DR200 PN. (Lower Receiver Group)

Bolt, Pistol Grip Attaching K1 PN 2, No DR200 PN. (Lower Receiver Group)

Steel Bolt for attaching pistol grip on pre-89 rifles of both major types.May not include star washe..

$10.00

Bolt, Pistol Grip Attaching, Socket Head. (Lower Receiver Group)

Bolt, Pistol Grip Attaching, Socket Head. (Lower Receiver Group)

Black Oxide socket head screw. Much easier to attach the pistol grip without fumbling than the facto..

$8.00

Buffer Ring and Spring, DR200 ONLY, DR200 PN 11/12 (Lower Receiver Group)

Buffer Ring and Spring, DR200 ONLY, DR200 PN 11/12 (Lower Receiver Group)

Currently the smaller diameter buffer and spring are out of stock.Buffer and spring fhe post-90 impo..

$35.00

Buffer Ring and Spring, Pre-89 impot guns only. K1 PN 27 (Lower Receiver Group)

Buffer Ring and Spring, Pre-89 impot guns only. K1 PN 27 (Lower Receiver Group)

Smaller 1/2" diameter buffer and spring for the K1 family and K2 family of rifles.Retained by 3/4" r..

$35.00

Bushing, Ejector Housing K1 PN 18, DR200 PN 10 (Lower Receiver Group)

Bushing, Ejector Housing K1 PN 18, DR200 PN 10 (Lower Receiver Group)

Steel bushing that sits in the lower receiver and houses the ejector and spring.Steel.Parked.Fits al..

$20.00

Button, Magazine Release with pin K1 PN 23, DR200 PN 19 (Lower Receiver Group)

Button, Magazine Release with pin K1 PN 23, DR200 PN 19 (Lower Receiver Group)

SOME NEW OLD STOCK. SOME USED/EXC.ROUND, PECULIAR TO THE TYPE, DAEWOO RIFLE MAG RELEASE BUTTONS.GRAY..

$20.00

Contractor Upper, Ready to install

Contractor Upper, Ready to install

i have ONE unit, built, boxed, test-fired and ready to ship. These are going to become more difficul..

$1,200.00

Disconnector. K1 PN 13, DR200 PN 1 (Bolt/Carrier Group)

Disconnector. K1 PN 13, DR200 PN 1 (Bolt/Carrier Group)

Firing disconnector for all rifle types.SteelParkerized..

$25.00

Extractor Pin, K1 PN 4, DR200 PN 12, (Bolt/Carrier Group)

Extractor Pin, K1 PN 4, DR200 PN 12, (Bolt/Carrier Group)

Extractor axle pin. Fits all types and models of Daewoo Rifles.Steel.Black Oxide..

$6.00

Front Pivot Pin K1 PN 35 DR200 PN 13 (Lower Receiver Group)

Front Pivot Pin K1 PN 35 DR200 PN 13 (Lower Receiver Group)

New Old Stock. Front Pivot PinsFit all rifle types...

$15.00

Hammer K1 PN 9, DR200 PN 6 (Lower Receiver Group)

Hammer K1 PN 9, DR200 PN 6 (Lower Receiver Group)

NEW OR REPARKED HAMMER FOR ALL RIFLE TYPES...

$35.00

Lever, Magazine Release K1 PN 25, DR200 PN 21 (Lower Receiver Group)

Lever, Magazine Release K1 PN 25, DR200 PN 21 (Lower Receiver Group)

Magazine Release Levers for all rifle types.Some new, some NOS, Some used and reparked.Steel, Parked..

$25.00

Pistol Grip. Pre-89 rifles. K1 PN 4,  (Lowe Receiver Group)

Pistol Grip. Pre-89 rifles. K1 PN 4, (Lowe Receiver Group)

THIS IS NOT A US MADE PART.FIBERGLASS FACTORY KOREAN PISTOL GRIP FOR PRE-89 IMPORT RIFLES.MAY OR MAY..

$60.00

Plunger & Spring for Windage Drum. K1 PN 12/13 DR200 PN 11/12 (Lower Receiver Group)

Plunger & Spring for Windage Drum. K1 PN 12/13 DR200 PN 11/12 (Lower Receiver Group)

WINDAGE WHEEL FLAT FACED DETENT AND SPRING FOR ALL MODELS.TOUGH TO FIND IF YOU LOSE 'EM...

$10.00

Showing 1 to 15 of 32 (3 Pages)

Fatal error: Call to a member function get() on null in /home/drp/public_html/index.php on line 97