Warning: fread(): Length parameter must be greater than 0 in /home/drp/public_html/system/library/cache/file.php on line 32Warning: fread(): Length parameter must be greater than 0 in /home/drp/public_html/system/library/cache/file.php on line 32 Parts for all Daewoo Rifle Types

Parts for all Daewoo rifle types

Parts for all Daewoo rifle types

This is a section for parts which fit BOTH direct impingement and gas piston rifles.

Pre-89 type pistol grips, pre-89 buffers and springs, some internals, front pivot pins, any parts which fit all Daewoo rifles can be found in this section.

K1, K1A1, AR110c, Max I=Pre-89 import direct impingement rifles

K2, AR200, Max II=Pre-89 import gas piston rifles

DR200, DR300=post-90 gas piston rifles

A NOTE ABOUT THE NUMBERS, the parts listed are notated with the numbers of the parts as they appear in the factory  manuals' exploded drawings. The DR200 and AR110c manuals have drawings with number each part. SO, if you have one of these manuals, which are available at http://www.stevespages.com/page7b.htm you can ensure that you're ordering the correct part by checking the drawing.




Product Compare (0)


Roll Pin 1/2" Rear Swivel, Gas Piston and Trigger Guard K1 PN 7 DR200 PN 6/25 (Lower Receiver Group)

Roll Pin 1/2" Rear Swivel, Gas Piston and Trigger Guard K1 PN 7 DR200 PN 6/25 (Lower Receiver Group)

ROLL PIN THAT RETAINS:---THE REAR SWIVEL IN THE LOWER RECEIVER---PRE-89 IMPORTS---RETAINS THE TRIGGE..

$8.00

ROLL PIN, Buffer retainer, or BHO Assy. K1 PN 7, DR200 PN 18/32 (Lower Receiver Group)

ROLL PIN, Buffer retainer, or BHO Assy. K1 PN 7, DR200 PN 18/32 (Lower Receiver Group)

3/4" roll pin for holding the Bolt Hold Open Assy in the Lower receiver, or the buffer and spring in..

$8.00

Safety detent, spring, set screw DR200/300 ONLY DR200 PN 30/31/36 (Lower Receiver Group)

Safety detent, spring, set screw DR200/300 ONLY DR200 PN 30/31/36 (Lower Receiver Group)

POSTBAN RIFLES HAVE A SET SCREW, SHORT SPRING, AND SPECIAL SHORT DETENT TO ACCOMMODATE THE THUMBHOLE..

$20.00

Safety Selector Lever. Take-offs. DR200 PN 33 (Lower Receiver Group)

Safety Selector Lever. Take-offs. DR200 PN 33 (Lower Receiver Group)

TAKE OFF SELECTORS FROM K1, K2, OR DR200 AS WE GET THEM. --OUR 90 DEGREE SELECTOR IS A FAR SUPERIOR ..

$20.00

Screw: Handguard K1 PN 4, DR200 PN 1, (Upper Receiver Group)

Screw: Handguard K1 PN 4, DR200 PN 1, (Upper Receiver Group)

I BELIEVE THIS IS THE ONLY PART OF THE BARREL GROUP WHICH IS COMPATIBLE BETWEEN RIFLE TYPES.THESE NE..

$20.00

Sling Swivel Assembly, Rear, pre-89 guns. K1 PN 26 (Lower Receiver Group)

Sling Swivel Assembly, Rear, pre-89 guns. K1 PN 26 (Lower Receiver Group)

Rear swivel for preban guns.We rarely get these. If you have the base, the front swivels will fit, w..

$30.00

Split Pin, Firing Pin Retaining. K1 PN 1, DR200 PN 9 (Bolt/Carrier Group)

Split Pin, Firing Pin Retaining. K1 PN 1, DR200 PN 9 (Bolt/Carrier Group)

New or used firing pin retaining pin.Steel.Parkerized ..

$10.00

Spring and Detent for Front Pivot Pin. K1 PN 33/34 DR200 PN 14/15 (Lower Receiver Group)

Spring and Detent for Front Pivot Pin. K1 PN 33/34 DR200 PN 14/15 (Lower Receiver Group)

New spring and plunger for front pivot pin. Fits all rifle types...

$8.00

Spring and Detent for pre-89 import rifles. K1 PN 5/6 (Lower Receiver Group)

Spring and Detent for pre-89 import rifles. K1 PN 5/6 (Lower Receiver Group)

ORIGINAL TYPE PISTOL GRIP DETENT AND SPRING FOR PREBAN TYPE RIFLES.OR IF YOU'VE HAD YOUR RIFLE APART..

$8.00

Spring, DIsconnector K1 PN 15 DR200 PN 4 (Lower Receiver Group)

Spring, DIsconnector K1 PN 15 DR200 PN 4 (Lower Receiver Group)

New Disconnector Spring for all rifle types...

$8.00

Spring, Ejector blade or Front Pivot Pin K1 PN 17/33 DR200 PN 9/14 (Lower Receiver Group)

Spring, Ejector blade or Front Pivot Pin K1 PN 17/33 DR200 PN 9/14 (Lower Receiver Group)

Coil spring for front pivot pin or ejector blade...

$8.00

Spring, Extractor. K1 PN 6/7, DR200 PN 14/15 (Bolt/Carrier Group)

Spring, Extractor. K1 PN 6/7, DR200 PN 14/15 (Bolt/Carrier Group)

Factory or extra power extractor spring for all Daewoo Rifle types.Some include rubber core. Extra p..

$8.00

Spring, Hammer Driving K1 PN 10, DR200 PN 7 (Lower Receiver Group)

Spring, Hammer Driving K1 PN 10, DR200 PN 7 (Lower Receiver Group)

New Hammer Springs. Fits all Daewoo Rifle types.Steel..

$10.00

Spring, Magazine Release K1 PN 24, DR200 PN 20 (Lower Receiver Group)
Spring, Trigger K1 PN 15, DR200 PN 5 (Lower Receiver Group)

Spring, Trigger K1 PN 15, DR200 PN 5 (Lower Receiver Group)

New trigger springs for all rifle types...

$10.00

Showing 16 to 30 of 32 (3 Pages)